FloJet RV Macerator Pump

FloJet RV Macerator Pump


Brand: FloJet
MFR #: 18550000A
UPC: 705474250004
$ 194.21
Availability: Only 2 in stock.



RV Macerator Pump from Flojet

Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.

The Flojet macerator pump will empty a typical 30-gallon holding tank in less than three minutes. The time increases somewhat as the distance pumped is increased beyond 25'. The pump will macerate and pump all waste and tissue normally found in RV waste systems. The same high quality Jabsco design found in boat stores worldwide. Put an end to handling and rinsing a dirty 3" sewer hose; instead use a cleaner, easier to handle garden hose. Now you can pump up hill, and around corners. The RV waste pump will simplify and improve your RV experience!

Features:
  • Neat and clean way to quickly evacuate waste tanks
  • Empty black-water and greywater Holding Tanks at home
  • Grinds waste as it pumps
  • Built-in Impeller Protection Device...longer life!
  • Flow of up to 13 GPM for fast, clean Holding Tank evacuation


Easy to Install
Because it is self-priming, it may be located up to four feet above the tank liquid level. The intake port is designed to accept a 3" ID slip-on hose and the discharge port will accept a 1" ID hose. When installed, the macerator can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home.

Applications
  • Empty holding tanks and avoid dump stations
  • Transfer waste from recirculating toilets to main holding tank


Impeller Release Feature
After long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown.

Specifications
Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate
Impeller: "Jabsco Nitrile" compound
Macerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum
Seal: Lip Type
Ports: Inlet RV model - 3" (76mm) hose
Outlet - 1" (19mm) Hose Barb

Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Impeller Protection Device that shuts-off pump after 20 seconds of run-dry
Complies with USCG Regulation 183.410
& ISO 8846 MARINE for Ignition Protection

Weight: 3.5lb (1.6 kg) Approx.
Manufacturer Part Number: 18550000A
UPC: 705474250004
Shipping Weight: 5 lbs
Box Dimensions: 4L x 10W x 5H inches
Owners Manual (pdf)
Brochure Literature (pdf)

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question


WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

By placing an order on FoundryOutdoors.com you assume all legal liability for complying with your local, state, and federal laws. Federal law requires that you must be at least 18 years old to purchase rifle or shotgun ammunition and 21 years or older to purchase handgun ammunition.

No ammo shipping to:
AK, CA, CT, DC, HI, IL, MA, NY.
In NJ: you must email FID + DL before ordering. No handgun ammo shipments to NJ.

For safety reasons, we cannot accept returns on tree stands, ammunition, or any used merchandise.